Most trainer manufacturers say don't. Most people do it anyway, and most of the time it works out. The interesting question is what separates the pairs that come out fine from the ones that emerge with the sole peeling away at the toe.
It comes down to what the shoe is made of and what's holding it together.
The Short Answer
Generally safe: canvas trainers, synthetic mesh running shoes, and most everyday knitted-upper trainers. Cold or 30°C, gentle cycle, low or no spin, inside a pillowcase or mesh bag, air dried away from heat.
Generally not: leather and suede (water stiffens and stains them permanently), anything with foam midsoles you care about, shoes with structured toe boxes or heel counters that lose their shape, and anything glued rather than stitched at the sole.
The critical detail is drying, not washing. Heat softens the adhesive holding uppers to soles, so the tumble dryer and the radiator are where trainers actually get ruined. Air drying at room temperature is not optional.
Remove the laces and insoles first and wash those separately. They're the dirtiest parts and they clean far better on their own.
What Actually Matters
A trainer is an assembly of dissimilar materials held together mostly with adhesive. That's the crux of it.
The upper is fabric or leather. The midsole is usually EVA foam, sometimes polyurethane. The outsole is rubber. In a running shoe there may also be a thermoplastic heel counter, a shank, and various glued-in reinforcements. Almost none of it is stitched — modern shoe construction is overwhelmingly adhesive, because it's lighter and cheaper.
Adhesives tolerate water reasonably well at low temperature. What they don't tolerate is heat. Most shoe adhesives soften somewhere around 60-70°C, which is well within the range of a tumble dryer or a radiator in winter. Once softened, the bond creeps under the stress of the foam trying to return to its shape, and when it cools the joint has moved. That's why soles start lifting at the toe and heel first — those are the highest-stress points.
The second consideration is the midsole foam. EVA is a closed-cell foam that absorbs relatively little water, but it does absorb some, and it takes days to release it fully. A running shoe that feels dry on the outside can still be wet inside the midsole, which is why washed running shoes often feel dead underfoot for a week afterwards.
Detailed Analysis
What survives and what doesn't
| Type | Machine washable? | Notes |
|---|---|---|
| Canvas (plimsolls, Converse-style) | Yes | The safest category by a distance |
| Synthetic mesh running shoes | Usually | Fine occasionally; foam degrades if done often |
| Knitted uppers | Usually | Can lose some shape; reshape while damp |
| Leather | No | Stiffens, cracks and water-stains permanently |
| Suede and nubuck | No | Nap is destroyed; use a suede brush instead |
| Football boots | No | Structured, often leather, expensive to replace |
| Walking boots | No | Membranes and treatments are damaged by detergent |
| Kids' school trainers | Yes | Cheap, canvas or synthetic, no real downside |
The pattern is straightforward: fabric survives, animal hide doesn't, and anything with a technical membrane or a treatment should be cleaned by hand.
Doing it properly
Before the machine. Knock off loose mud outside and let caked dirt dry — wet mud smears into the fabric and sets. Remove laces and insoles. Scrub the outsole with an old toothbrush; the tread carries most of the grit that would otherwise batter the drum.
Protection. Put the shoes in a pillowcase tied shut, or a mesh laundry bag. This does two jobs: it stops the shoes hammering the drum and door glass, and it stops them tumbling freely, which is what pulls at glued seams.
Load the drum with towels. Two or three old towels cushion the shoes, quieten the whole thing considerably, and help balance the drum for the spin. Without them a pair of trainers on their own is genuinely loud and can trip an imbalance detection.
Cycle settings. Cold or 30°C. Delicates or gentle. Spin at 400-600rpm or off entirely — high spin speeds put real force through a glued joint. Liquid detergent rather than powder, which can leave white residue in mesh.
No fabric softener, no bleach. Softener coats fabric and can leave synthetic mesh looking greasy. Bleach degrades adhesives and yellows white midsoles.
Drying: the part that actually matters
Air dry at room temperature. Not the tumble dryer, not the radiator, not the airing cupboard, not in direct sun on a windowsill.
Stuff them loosely with newspaper or kitchen roll, which draws moisture out from inside and helps hold the shape. Change the paper after a few hours when it's damp. Stand them somewhere with moving air — a hallway, a windowsill with the window open — rather than a closed cupboard.
Expect 24 to 48 hours, and longer for running shoes with thick midsoles. Rushing this is the single most common way trainers get ruined, and it's frustrating precisely because the washing went fine.
If you genuinely can't wait, a fan pointed at them at room temperature speeds things up substantially without any heat. A dehumidifier in the same room does the same job.
Washing running shoes specifically
Worth a separate note, because runners ask this constantly and the answer differs.
Machine washing running shoes occasionally is fine. Doing it routinely shortens their useful life, because repeated wetting and drying accelerates EVA midsole breakdown — the foam loses resilience faster, and midsole cushioning is what you're actually paying for in a running shoe.
For a pair you're tracking mileage on, hand cleaning the upper with a brush and mild detergent is better practice. Save the machine for the point where they're too grim to face and you're near the end of their life anyway.
Real-World Considerations
There's a machine-side risk that gets forgotten. Trainers are hard, heavy and unbalanced, and a pair tumbling loose in a drum can crack the door glass, damage the drum paddles, or work a stone from the tread into the gap between drum and outer tub. That last one produces an alarming grinding noise and sometimes punctures the tub.
The pillowcase and towels genuinely address this. Skipping them is where the risk lives.
On warranties: most trainer manufacturers explicitly exclude machine washing, so a sole that delaminates afterwards is your problem. That's worth knowing for an expensive pair still within its first few months.
Frequency matters more than people expect. Once or twice in a shoe's life is unremarkable. Monthly washing will visibly age a pair — fading, foam softening, glue joints creeping — regardless of how carefully you do it.
And a practical note for households with school-age children: cheap canvas school trainers are essentially disposable and machine wash without drama. There's no reason to hand clean those, and the calculation is completely different from a £140 pair of running shoes.
Common Mistakes Buyers Make
Tumble drying them afterwards. The heat softens the adhesive and the tumbling stresses the joint. This is how soles come off.
Washing hot. 40°C and above starts working on the glue and can shrink synthetic uppers. Cold or 30°C is enough for shoes.
Leaving the laces and insoles in. Both clean better separately, and insoles left in stay wet for days inside the shoe.
Putting them in loose. Damage to the machine is a real risk, and free tumbling pulls at glued seams.
Drying on a radiator. Same failure mode as a tumble dryer, just slower. It also hardens EVA foam permanently.
Alternatives Worth Considering
For leather, suede and anything expensive, hand cleaning is the answer: a soft brush, a bowl of lukewarm water with a drop of washing-up liquid, and patience. Suede needs a dedicated brush and eraser and no water at all.
Dedicated trainer cleaning kits are genuinely better than improvising for white midsoles and mesh — the brushes are the right stiffness and the solutions are formulated not to yellow foam. For anyone who cares about a specific pair, £10-£15 well spent.
For the routine problem of smell rather than dirt, washing isn't the fix. Bicarbonate of soda left in overnight, removable insoles washed separately, and alternating pairs so each gets 24 hours to dry out does far more than a wash cycle.
Frequently Asked Questions
What temperature should you wash trainers at?
Cold or 30°C on a gentle cycle. Higher temperatures begin softening the adhesives holding the shoe together.
Should you use a laundry bag?
Yes, or a tied pillowcase. It protects the drum and door glass and stops the shoes tumbling freely against glued seams.
Can you tumble dry trainers afterwards?
No. Dryer heat softens sole adhesive and the tumbling then stresses it. Air dry at room temperature for 24-48 hours, stuffed with paper.
Can you wash leather trainers?
Not in a machine. Water stiffens leather, causes permanent staining and can crack the finish. Clean by hand with a damp cloth and a leather conditioner.
How often can you machine wash running shoes?
Occasionally. Repeated wetting accelerates EVA midsole breakdown, which costs you the cushioning you paid for. Hand clean the uppers between washes.
Final Thoughts
Canvas and mesh go in the machine happily at 30°C in a pillowcase with a few towels for company. Leather and suede don't go anywhere near it.
Then leave them alone for two days. Every trainer-washing disaster is really a drying disaster — the wash almost never causes the damage, and the radiator almost always does.
Post a Comment