Almost all laundry advice for the past fifteen years has pushed in one direction: wash cooler, save energy, protect fabrics. It's good advice for most of what goes in a machine. Bedding is the exception, and the reason is specific rather than a general hygiene worry.
Dust mites survive a 40°C wash comfortably. That single fact drives everything else here.
The Short Answer
60°C for sheets, pillowcases and duvet covers, at least every other wash. That's the temperature at which dust mites are reliably killed and their allergen is broken down. Below about 55°C they largely survive the cycle, get rinsed around, and settle back into the fabric.
40°C is fine for the alternate washes if you're washing weekly, and fine as a default for anyone without allergies who changes bedding often. It cleans perfectly well — it just doesn't sanitise.
If someone in the house has asthma, eczema or a dust mite allergy, make it 60°C every time and don't alternate. The energy difference is roughly 15-20p a wash, which is not a meaningful sum against the symptoms it prevents.
Check care labels for anything with elastane, printed designs or dark dyes — some won't take 60°C repeatedly without fading or shrinking.
What Actually Matters
House dust mites are microscopic arachnids that live in bedding, feed on shed skin, and produce a protein in their droppings that is one of the most common indoor allergens in the UK. A typical mattress and bedding set hosts a substantial population, and the warm, humid environment of an occupied bed is close to ideal for them.
The 60°C figure isn't arbitrary. Mites die at temperatures above roughly 55°C, and the allergen protein — which causes the reaction even after the mite is dead — begins to denature at similar temperatures. A wash at 40°C achieves neither reliably. It removes some allergen mechanically through agitation and rinsing, but it doesn't kill the population.
There's a second consideration that applies to everyone regardless of allergies. Bedding accumulates skin cells, body oils, sweat and cosmetic residue. Those don't cause illness, but they do build up in fibres and are what makes bedding feel and smell stale even when it looks clean. Higher temperatures with a bio detergent shift them considerably better than cool washes.
Set against that: heat wears fabric. Repeated 60°C washing fades colours faster, weakens elastic in fitted sheets sooner, and shortens the life of the set. That's the real trade-off, and it's why alternating makes sense for households without a specific reason to sanitise every time.
Detailed Analysis
Temperature by item
| Item | Recommended | Notes |
|---|---|---|
| Cotton sheets and pillowcases | 60°C | Alternate with 40°C if no allergies |
| Duvet covers | 60°C | Check dark or printed covers for fading |
| Pillows (synthetic) | 60°C | Two at a time for balance; check the label |
| Pillows (feather or down) | 40°C | Gentle cycle, thorough drying essential |
| Duvets (synthetic) | 60°C if capacity allows | Needs 8kg+ for a double |
| Duvets (feather or down) | 30-40°C | Many say dry clean only |
| Mattress protectors | 60°C | The highest-value item to wash hot |
| Electric blankets | Do not wash unless stated | Follow the manufacturer exactly |
| Bedding with elastane | 40°C | Heat destroys the stretch permanently |
The mattress protector deserves particular attention. It sits directly between the sleeper and the mattress, catches the majority of skin cells and moisture, and is the single most effective barrier against mite populations building in a mattress you can't wash. It's also the item most people wash least often.
How often, honestly
Weekly for sheets and pillowcases is the standard advice and it's about right for most people. Fortnightly is defensible for a single sleeper in a cool bedroom who showers before bed. More often than weekly is worth it if you sweat heavily, sleep with pets on the bed, or have eczema.
Duvet covers can go a little longer than sheets since they have less skin contact — every two weeks is reasonable. Pillows themselves should be washed two to four times a year, and replaced every couple of years regardless, because they accumulate more than washing removes.
Duvets need washing once or twice a year, and this is where most households quietly give up because their machine can't take one. That's a capacity question rather than a temperature one, and a launderette's large machine is often the practical answer.
Getting a 60°C wash to actually work
Three things undermine hot washing, and all three are common.
Overloading. A drum crammed with a full bedding set doesn't tumble, so the water and detergent don't circulate through the fabric. Bedding is bulky when wet and needs more room than its dry weight suggests — a double set is realistically a full 8kg load on its own.
The wrong detergent. Biological detergents contain enzymes that break down protein and body soil, which is exactly what bedding carries. Non-bio is gentler on skin but genuinely less effective on this particular soil type. If someone has sensitive skin, non-bio plus an extra rinse is the sensible compromise rather than abandoning bio entirely.
Assuming the machine reaches the stated temperature. Many machines run cooler than the dial suggests, particularly on longer eco-style cycles where the programme prioritises energy. If dust mites are the point of the exercise, a shorter cottons cycle at 60°C is more likely to hit temperature than a 3-hour eco 40-60 programme.
The energy question
Worth putting numbers on it, because it's the reason people default to 40°C.
A full cotton load at 40°C uses roughly 0.8-1.0 kWh. The same load at 60°C uses about 1.3-1.6 kWh. At around 25p per kWh, that's a difference of roughly 12-18p per wash. Washing bedding weekly at 60°C rather than 40°C costs perhaps £7-9 a year.
That figure is worth having, because it reframes the decision. The energy argument for cool washing is strong across a household's laundry as a whole — most of which genuinely doesn't need heat. Applying it to the one category where temperature does something specific saves a few pounds a year and gives up the benefit entirely.
Real-World Considerations
Drying matters as much as washing for mite control, and it gets overlooked. Mites need humidity above roughly 50 per cent to survive. Bedding that's dried thoroughly — tumble dried, or aired properly rather than left slightly damp on a rack in a closed room — is a considerably less hospitable environment than bedding that's put back on the bed not quite dry.
The same applies to the bed itself. Throwing the duvet back over the bed first thing traps overnight moisture in the mattress. Pulling it back for half an hour before making the bed lets that moisture evaporate, and it's a free intervention that does more than most.
For allergy households specifically, the combination that works is: 60°C washing, thorough drying, mite-proof barrier covers on mattress and pillows, and keeping bedroom humidity down. Any one of those alone is much less effective than the set.
One practical caution about washing duvets and pillows at home. A soaked synthetic duvet is extremely heavy, and forcing one into an undersized machine risks damaging the drum bearings — a repair that costs more than the duvet. If it doesn't fit with room to tumble, don't.
Common Mistakes Buyers Make
Washing everything at 40°C on principle. Right for most laundry, wrong for bedding, and the saving is under £10 a year.
Forgetting the mattress protector. It catches most of what you're trying to remove and gets washed least.
Overloading with a full bedding set. Bedding needs room to move. A crammed drum washes poorly at any temperature.
Using a long eco cycle expecting 60°C. Eco programmes often run cooler than labelled. A standard cottons cycle is more reliable when temperature is the point.
Putting bedding back slightly damp. Residual moisture is exactly what mites need. Dry it fully.
Alternatives Worth Considering
For fabrics that genuinely can't take 60°C — silk, some dark dyes, anything with elastane — a laundry sanitiser added to a 40°C wash is a reasonable substitute. These work chemically rather than thermally and are effective against bacteria, though evidence on dust mite allergen specifically is weaker than for heat.
Mite-proof barrier covers, with a weave tight enough to block allergen passage, are more effective per pound spent than any washing regime for an allergy sufferer. They go on the mattress and pillows underneath ordinary bedding, and they're washed occasionally rather than weekly.
For duvets and pillows that won't fit a domestic machine, launderette machines run 11-18kg and cost a few pounds a load. Twice a year, that's a trivial expense against the alternative of never washing them.
Frequently Asked Questions
Does 40 degrees kill dust mites?
No. Mites survive at 40°C and their allergen isn't broken down. You need above roughly 55°C, which is why 60°C is the recommended figure.
How often should you wash sheets?
Weekly for most people. Fortnightly is acceptable for a single sleeper in a cool room. More often with pets on the bed, heavy sweating or eczema.
Is 60 degrees bad for fabric?
It shortens the life of bedding — faster fading and elastic degrading sooner. That's the genuine trade-off, and it's why alternating with 40°C is sensible without allergies.
What temperature should pillows be washed at?
Synthetic pillows at 60°C, two at a time to keep the drum balanced. Feather and down at 40°C on a gentle cycle, dried very thoroughly.
Does washing bedding hot cost much more?
About 12-18p extra per load, or roughly £7-9 a year washing weekly. Small enough that it shouldn't drive the decision.
Final Thoughts
60°C for sheets, pillowcases, duvet covers and mattress protectors, alternating with 40°C if nobody in the house has allergies and every wash if somebody does. Check labels for elastane and dark prints, don't overload the drum, and dry everything properly.
Bedding is the one load where the modern instinct to wash cool costs you something real. Everywhere else in the machine, wash as cool as you like.
Post a Comment