Your dishwasher has a water hardness setting. So does your coffee machine. Most people have never changed either, because doing so requires a number nobody has.
That number is published, free, by your water supplier, indexed by postcode. Finding it takes about two minutes and it settles the descaling schedule for every water-using appliance in the house.
The Short Answer
Go to your water supplier's website and search for "water quality" or "water hardness" with your postcode. Every UK supplier publishes this. It is free and it does not require an account.
You will get a figure in one or more of these units:
| Unit | What it is | Used by |
|---|---|---|
| mg/l or ppm CaCO₃ | Milligrams of calcium carbonate per litre | Water suppliers |
| °dH (German degrees) | ppm ÷ 17.8 | Most appliance manuals |
| °Clark (English degrees) | ppm ÷ 14.3 | Older UK documentation |
| °fH (French degrees) | ppm ÷ 10 | Some European appliances |
The classification, roughly:
- Soft — under about 100 ppm (under 6°dH)
- Moderately hard — 100 to 200 ppm (6-11°dH)
- Hard — 200 to 300 ppm (11-17°dH)
- Very hard — over 300 ppm (over 17°dH)
Roughly 60% of UK households are in hard or very hard areas, concentrated in the south and east. Scotland, Wales, the north-west and the south-west are mostly soft.
Then use it. Set the dishwasher's hardness level, set the coffee machine's, and adjust your detergent dose. Those three changes are what the number is for.
What Actually Matters
The unit conversion, because appliances and suppliers use different ones. Your supplier will most likely give you mg/l. Your dishwasher manual most likely wants °dH. Divide by 17.8. This single conversion is why most people give up.
Hardness varies within a supply area. Suppliers blend sources, and the figure can differ between neighbouring postcodes and occasionally by season. Use the postcode lookup rather than a regional map.
What the number actually changes. Three things: how often scale builds up on heating elements, how much detergent is consumed neutralising minerals rather than removing dirt, and how frequently appliances with built-in softeners need regenerating. All three are settings or habits rather than purchases.
Detailed Analysis
Getting the figure
Two routes, and the first is better.
Your supplier's postcode lookup. Search for your water company plus "water hardness" and you will find a page that takes a postcode and returns a figure, usually with the units stated and often with the classification. This is measured data from the supply zone, updated regularly, and it is the most accurate source available to a householder.
If you are not sure who supplies your water, it is on your bill, and in much of England water and sewerage may come from different companies. The water supplier is the one you want.
A test strip. Most appliances that care about hardness ship with one, and they are sold in packs for a few pounds. Dip, wait, compare to the chart.
Strips are useful as a cross-check and for two specific cases: private supplies such as boreholes, where no supplier publishes anything, and houses with a water softener already fitted, where you want to know what the appliance actually receives rather than what arrives at the boundary.
For a normal mains supply, the supplier's figure is more reliable than a strip.
Setting the dishwasher
This is the setting with the most immediate effect, and almost nobody adjusts it.
A dishwasher contains an ion exchange water softener. Dishwasher salt regenerates it. The hardness setting tells the machine how often to regenerate — too low and it under-regenerates, leaving scale and white film on glassware; too high and it uses salt and water unnecessarily.
Access varies by manufacturer and is always in the manual. Typically it involves holding two buttons while powering on, then cycling through levels. Manuals are downloadable by model number, and finding that number is covered in most appliance documentation on the rating plate inside the door.
Worth knowing that all-in-one tablets do not replace salt in hard water areas. They contain a softening component that helps, but they do not regenerate the machine's resin. In a hard water area you need both.
Getting this right is the fix for white residue and cloudy glassware, provided the cloudiness is limescale rather than permanent etching — a vinegar soak distinguishes them.
Setting the coffee machine
Bean-to-cup machines suffer more from hard water than anything else in a kitchen, because they heat small volumes repeatedly and their internal pipework is narrow.
Most have a hardness setting in the menu, and it controls the descale prompt interval. Set too soft and the machine will let scale build up for months longer than it should.
Many also take a filter cartridge. A filter reduces the scale load but does not eliminate it, and machines with a filter fitted usually want the hardness setting adjusted accordingly — the manual will say how.
Scale in a coffee machine shows up as slower flow, cooler coffee and eventually a machine that will not pump at all. By that point the damage is done.
Adjusting your detergent dose
The one most people get backwards.
Detergent dosing instructions on the packet are generally written for hard water. A proportion of the detergent is consumed by calcium and magnesium rather than by dirt, so hard water genuinely needs more.
Which means soft water areas are systematically over-dosing when they follow the packet. Over-dosing leaves residue in fabric, and residue attracts soil, dulls whites and holds odour — the mechanism behind a lot of complaints about laundry that never seems properly clean. The right approach is covered in how much detergent to use in a washing machine.
In a soft water area, two-thirds of the marked dose is usually plenty. In a hard water area, follow the packet, or add soda crystals to soften the water so the detergent works on the dirt instead.
What hardness does to appliances over time
Worth understanding because the damage is slow and invisible.
Scale forms preferentially on the hottest surface, which is the heating element. A layer of scale insulates that element from the water it is trying to heat, so the element runs hotter to achieve the same water temperature. Elements fail from that thermal stress.
That applies to washing machines, dishwashers, kettles and coffee machines alike. The kettle is the one you can see, which is why it is the one people descale — and it is the cheapest of the four to replace.
The washing machine element is the expensive one and nobody looks at it. In a very hard water area, a maintenance wash with a descaler every few months is genuinely worth the fifteen minutes.
Real-World Considerations
The kettle is a decent proxy if you want a rough answer immediately. Furring within a fortnight suggests hard or very hard. Furring after several months suggests moderately hard. No visible scale in a year suggests soft. It is not precise but it is directionally reliable.
Blending means neighbouring postcodes can genuinely differ. Suppliers draw from multiple sources and the mix changes, which is why the postcode lookup exists rather than a simple regional map.
If you have moved house, re-check. Moving from Glasgow to Cambridge changes your water from soft to very hard, and every setting and habit that worked before is now wrong. This is a common and unrecognised cause of appliance problems in the first year after a move.
Water softeners change the answer for everything downstream of them. If one is fitted, appliances receive softened water and should be set accordingly — usually to the softest setting. Worth checking whether the kitchen cold tap is plumbed before or after the softener, since drinking water is often taken off ahead of it.
Private supplies — boreholes, springs, wells — publish nothing, and hardness can vary seasonally with rainfall. Test strips are the only practical route, and testing more than once through the year is worth doing.
Common Mistakes Buyers Make
- Never looking it up. It is free, published by postcode, and takes two minutes.
- Using a regional map instead of a postcode lookup. Blending means neighbouring areas genuinely differ.
- Mixing up the units. Suppliers give mg/l; appliances usually want °dH. Divide by 17.8.
- Assuming all-in-one tablets replace dishwasher salt. They do not regenerate the machine's softener resin.
- Following packet dosing in a soft water area. The instructions assume hard water, so soft water households over-dose.
- Leaving the appliance hardness setting at the factory default. It is set to a middle value that suits nobody in particular.
- Not re-checking after moving house. Soft to very hard is a genuine change and every setting needs revisiting.
- Descaling only the kettle. It is the cheapest appliance affected and the only one you can see.
Alternatives Worth Considering
A test strip is the right tool for a private supply, for checking what an appliance actually receives downstream of a softener, or as a sanity check on a published figure.
Soda crystals in the wash are the cheap traditional response to hard water. They soften the water so detergent works on dirt rather than minerals, which means you need less detergent rather than more.
For very hard areas where multiple appliances are suffering, a whole-house softener is the structural answer. It is a significant purchase and the payback on appliance life alone runs to many years, so it is best justified on the broader benefits rather than on appliance protection alone.
And for the specific case of a coffee machine, a filter cartridge is far cheaper than treating the whole house and addresses the appliance that suffers most.
Frequently Asked Questions
How do I find my water hardness in the UK?
Search your water supplier's website for water hardness or water quality and enter your postcode. Every supplier publishes it free.
What is dH?
German degrees of hardness, the unit most appliance manuals use. Divide a figure in mg/l or ppm by 17.8 to convert.
Is my area hard water?
Roughly 60% of UK households are in hard or very hard areas, mostly in the south and east. Use the postcode lookup rather than assuming.
Do all-in-one tablets mean you don't need dishwasher salt?
Not in a hard water area. Tablets contain softening agents but they do not regenerate the machine's ion exchange resin.
Does hard water need more detergent?
Yes, and the packet instructions already assume it. Soft water areas following those instructions are over-dosing.
How can I tell without looking it up?
The kettle. Furring within a fortnight means hard or very hard; no visible scale in a year means soft.
Final Thoughts
This is one of the few pieces of household admin that takes two minutes and then improves things permanently. The figure does not change, you only need it once, and it settles three separate settings that most people leave on their factory defaults for the life of the appliance.
Look it up, write it on a note inside a kitchen cupboard, and use it next time you open an appliance manual. In a hard water area it will also tell you that descaling is not optional — see the maintenance schedules that go with it, and the dosing question in how much detergent to use.
Post a Comment